Teaching & Learning

Teaching & Learning

• Media Services
  • Text, Image, Audio, Video Production
  • Custom Website Development
  • Course & Project Support
  • Language Support
  • GIS Support
• Labs & Classrooms
  • List of all Labs & Smart Classrooms
  • Bosler Language Lab
  • Microroom Lab
  • Media Center
  • Audio & Video Editing Rooms
• Training & Support
  • Getting Moodle Help
  • Getting Blackboard Help
  • Setting Up a Blackboard Course
  • Tutorials
  • Schedule a Workshop
  • On-Site Training
• Hardware, Software & Equipment
  • Software
  • Social Software
  • Hardware
  • Multimedia Equipment
• Willoughby Fellows Program
• Projects & Initiatives
• Events & Activities
  • Teach with Technology
  • Previous TwT Topics

News & Events

East College 300

Seats	Computers		Media controller	Laptop connect	DVD /VCR	Special features
	Instructor	Student
35	Mac	--	X	X	X

Welcome to Your Smart Classroom! The Smart protocol for classroom technology is designed to make using computer, video, CD, and DVD playing as easy as possible. Please, do not hesitate to address questions about the Smart classrooms to Library & Information Services. We can be contacted via E-mail (helpdesk@dickinson.edu), telephone (x1000), or by visiting the Help Desk on the lower level of the Waidner-Spahr Library.. East College 300 Smart Equipment

Remote Controls for Equipment
Samsung DVD/VCR	MediaLink

Basic instructions
The MediaLink controller on top of the podium should be used to turn the projector on and off, select input sources, and set volume. Please DO NOT use the projector remote control for these functions. You can also blank the image with the "pic mute" button and the sound with the "audio mute" button. If the image from the computer is cut off on the screen, press the "auto image" button and the projector should adjust it. Please note that in the event buttons are pressed with the projector off or the DVD/VCR mode is changed not using the MediaLink, the controller may "get out of sync" with the actual conditions. In most cases it is only necessary to press the appropriate button again on the MediaLink (even if it is already illuminated) to restore function.

To turn the projector On or OFF
Use the Display ON and OFF buttons on the MediaLink. The projector takes 30 seconds to warm up (The button will flash while the projector is warming up or cooling down. Please do not press other buttons during this time).

To view the built-in Mac
With the projector on, press the PC button on the MediaLink. Note that the volume is controlled both by the Mac volume setting and the volume on the MediaLink. For optimum widescreen image on the ceiling projector, the resolution of the iMac VGA output should be set to 1280x768 60 Hz using the display icon in the top toolbar.

To view a laptop
Connect the VGA cable located on top of the podium to the laptop VGA jack. If using sound, connect the "mini" sound plug provided to the laptop headphone jack. With the projector ON, press the LAPTOP button on the MediaLink.You may need to press a function key on your laptop to enable the external monitor function (may be marked "LCD/CRT" or with a monitor icon).

To Play & View a DVD, Videotape, or CD: 
If the DVD/VCR is not already ON, first turn it on with its power button. With the projector on, press the DVD or VCR button on the Media Link. Insert your CD, DVD, or video tape into the appropriate drawer or slot. Use the controls on the right side of the MediaLink (or the Samsung remote) to control playback functions. If a cable TV channel is showing, press the TV/VCR button on the MediaLink to eliminate it. You must use the MediaLink to change between DVD and VCR functions, the buttons on the remote may not work as expected. The other functions on the remote work as described in the DVD/VCR manual. Note:The small device attached to the front of the DVD/VCR is intended to be there, please do not remove it. The remote will work fine with it in place.

To View Campus Cable TV: With the projector on, press the VCR button on the MediaLink.You can change channels by using the channel ("CH") up and down buttons or by using the keypad on the Samsung remote to enter the channel number.

 About aspect ratio: the projector is a 16:9 (wide screen) format rather than the conventional 4:3 ratio. The iMac should display in wide screen format while most laptops and video should be be letter boxed (black bars on either side). If the image does not appear to be properly proportioned, use the "aspect" button on the MediaLink to cycle thru your other choices. You may need to press the "Auto Image" also once you have selected a different aspect ratio.

To control sound volume
Use the Volume control on the MediaLink. (The volume control on the projector remote has no effect).

Thank you,
The Staff of Library & Information Services