Teaching & Learning
News & Events
Denny 115 (Keck Anthropology Lab)
| Seats | Computers | Media controller |
Laptop connect |
DVD /VCR |
Special features | |
| Instructor | Student | |||||
| 35 | Win | 12 Win laptops |
-- | X | X* | |
Welcome to Your Smart Classroom!
|
| Remote Controls for Equipment | ||
 |
 |
 |
| Sanyo Projector | Sharp Multiregion (International) DVD/VCR | Sound Control |
To Turn on the Video Projector:
Find the remote for the Sanyo projector (see image above).
To turn the projector on, point the remote at the front of the projector and push the pink "On-Off" button. Do not adjust the sound volume on the projector remote;
use the sound system control (see below). Use the
"Computer" or "Video" buttons on the remote
to select your projection source. To turn the projector off,
push the pink "On-Off" button on the remote. At
the "Power off?" prompt, press the pink "On-Off"
button again. The projector fan will continue to run
until the unit is cooled down; it will shut down automatically.
Note: The slide switch at the bottom of the Sanyo
remote must be "on" in order for it to function.
To Turn on & View the Computer:
To use the computer, you will need to press the power button
on the computer (inside the cabinet). Once the computer
has
completely booted-up, you can access programs like PowerPoint,
Word, and Internet Explorer by clicking the icons on the
screen.
To project the computer screen, with the projector on, press
the "Computer" button on the Sanyo remote to
select "Computer 1"
To view a laptop
Connect the VGA cable located inside the podium to the laptop
VGA jack.With the projector ON, press the "computer"
button on the Sanyo remote to select "Computer 2".You
may need to press a function key on your laptop to enable
the external monitor function (may be marked "LCD/CRT"
or with a monitor icon).
To Play & View a DVD, Videotape, or CD:
Find the remote for the Sharp multiregion (international)
combination CD/DVD/VCR unit. To turn the combination unit
on, press the red "Operate" button on the remote. With the
projector on, press the "Video" button on the Sanyo remote.
Insert your CD, DVD, or video tape into the appropriate
drawer
or slot. There are separate counters and controls for the
VCR and CD/DVD. On the remote, push the "VCR-DVD" switch
(at the bottom of the remote: see image above) to the
appropriate
media type. VCR control functions are labelled in orange
and DVD functions in green: white-labelled functions work
the
same in either mode. To select which media type the projector
displays, press the "DVD/VCR Selector" button in the upper
right of the remote (see image above). While one media
type
is playing, you can push the "VCR-DVD" switch to the
other media type and key that media in preparation for
viewing.
[NOTE: This unit will play NTSC (US format), PAL, and SECAM
media. However, French SECAM video tapes will only play
in
black-and-white.] If a cable TV channel is showing, use the
channel down button on the Sharp remote to select "line
2" to eliminate it.
To View Campus Cable TV: Find the remote for the Sharp combination CD/DVD/VCR unit. To turn the combination unit on, press the red "Operate" button on the remote. With the projector on, use the "Video" button on the remote to select your projection source. You can change channels by using the channel ("CH") up and down buttons or by using the keypad to enter the channel number. Turn the unit off by pressing the "Operate" button.
To Control the Sound Level:
You can control the sound for either the computer or the
CD/DVD/VCR unit using the room's sound system. The sound
system controller
(see image above) is attached to the desktop. Be aware. The volume controls on the computer interact
with those of the sound system, so adjusting the volume on
the computer will change the level of sound from the sound
system as well
Please, turn off all of the equipment before you leave the room.
Thank you,
The Staff of Library & Information Services