Dana 2


Seats Computers Media
controller		 Laptop
connect		 DVD
/VCR		 Special features
Instructor Student
24 Mac -- -- -- x  

Welcome to Your Smart Classroom!
The Smart protocol for classroom technology is designed to make using computer, video, CD, and DVD playing as easy as possible. Please, do not hesitate to address questions about the Smart classrooms to Library & Information Services. We can be contacted via E-mail (helpdesk@dickinson.edu), telephone (x1000), or by visiting the Help Desk on the lower level of the Waidner-Spahr Library..

Dana 2 Smart Equipment

Remote Controls for Equipment
Sanyo Projector Samsung DVD/VCR Sound Control

To Turn on the Video Projector:
Find the remote for the Sanyo projector (see image above). To turn the projector on, point the remote at the front of the projector and push the pink "On-Off" button. Do not adjust the sound volume on the projector remote; use the sound system control (see below). Use the "Computer" and "Video" buttons on the remote to select your projection source. To turn the projector off, push the pink "On-Off" button on the remote. At the "Power off?" prompt, press the pink "On-Off" button again.  The projector fan will continue to run until the unit is cooled down; it will shut down automatically.

To View the Computer:
 •Note: An instructor computer is not yet installed. For now, you can connect a laptop to the cable provided.
To project the computer screen, with the projector on, press the "computer" button on the Sanyo remote until "Computer 1 " is selected as the source.

To Play & View a DVD, Videotape, or CD:
Find the remote for the Samsung combination CD/DVD/VCR unit. To turn the combination unit on, press the red "Power" button on the remote. With the data projector on, press the "Video" button on the Sanyo remote. Insert your CD, DVD, or cassette into the appropriate drawer or slot and press the "Play" button. To eject your disc or cassette, press the "Open/Close" button. Turn the unit off by pressing the "Power" button.

To Control the Sound Level:
You can control the sound for either the computer or the CD/DVD/VCR unit using the room's sound system. The sound system controller (see image above) is attached to the desktop. You can adjust the sound level by turning the knob clockwise or counter-clockwise. Be aware. When you use the computer, the volume controls on the computer interact with those of the sound system, so adjusting the volume on the computer will change the level of sound from the sound system as well.

Please, turn off all of the equipment before you leave the room.

Thank you,
The Staff of Library & Information Services