Teaching & Learning
News & Events
Bosler 313
| Seats | Computers | Media controller |
Laptop connect |
DVD /VCR |
Special features | |
| Instructor | Student | |||||
| 25 | Dual | -- | -- | X | X* | SmartBoard |
Welcome to Your Smart Classroom!
|
| Remote Controls for Equipment | ||
 |
 |
 |
| Sanyo Projector | Sharp Multiregion (International) DVD/VCR | Sound Control |
To Turn on the Video Projector:
Find the remote for the Sanyo projector (see image above). To turn the
projector on, point the remote at the front of the projector and
push the pink "On-Off" button. Do not adjust the sound volume on
the projector remote; use the sound system control (see below). Use
the "Computer" or "Video" buttons on the remote to select
your projection source. To turn the projector off, push the pink "On-Off" button
on the remote. At the "Power off?" prompt, press the pink "On-Off" button
again. The projector fan will continue to run until the unit is cooled
down; it will shut down automatically.
Note: The slide switch at the bottom of the Sanyo remote must be "on" in
order for it to function.
To Turn on & View the Computer:
To use the computer, you will need to press the power button on the back of
the iMac. Once the computer has completely booted-up, you can access programs
like PowerPoint, Word, and Internet Explorer by clicking the icons on the
screen. To project the computer screen, with the projector on, press the "Computer" button
on the Sanyo remote. If you need to use a different computer with the projector,
please contact Library & Information Services (x1000) for assistance.
To Play & View a DVD, Videotape, or CD:
Find the remote for the Sharp multiregion (international)
combination CD/DVD/VCR unit. To turn the combination unit on, press
the red "Operate" button on the remote. With the projector on,
press the "Video" button on the Sanyo remote. Insert your CD, DVD,
or video tape into the appropriate drawer or slot. There are separate
counters and controls for the VCR and CD/DVD. On the remote, push
the "VCR-DVD" switch (at the bottom of the remote: see image above)
to the appropriate media type. VCR control functions are labelled
in orange and DVD functions in green: white-labelled functions
work the same in either mode. To select which media type the projector
displays, press the "DVD/VCR Selector" button in the upper right
of the remote (see image above). While one media type is playing,
you can push the "VCR-DVD" switch to the other media type and key
that media in preparation for viewing. [NOTE: This unit will play
NTSC (US format), PAL, and SECAM media. However, French SECAM video
tapes will only play in black-and-white.] If a cable TV channel
is showing, use the channel down button on the Sharp remote to
select "line 2" to eliminate it.
To View Campus Cable TV: Find the remote for the Sharp combination CD/DVD/VCR unit. To turn the combination unit on, press the red "Operate" button on the remote. With the projector on, use the "Video" button on the remote to select your projection source. You can change channels by using the channel ("CH") up and down buttons or by using the keypad to enter the channel number. Turn the unit off by pressing the "Operate" button.
To Control the Sound Level:
You can control the sound for either the computer or the CD/DVD/VCR unit using
the room's sound system. The sound system controller (see image above) is
attached to the desktop. To turn the sound system on, turn the knob
clockwise. You can adjust the sound level by turning the knob clockwise or
counter-clockwise. Be aware. The volume controls on the computer interact
with those of the sound system, so adjusting the volume on the computer will
change the level of sound from the sound system as well. To turn the sound
system off, turn the knob counter-clockwise until it clicks.
Please, turn off all of the equipment before you leave the room.
Thank you,
The Staff of Library & Information Services